Enclosed Helicopter Trailer

Description

Enclosed Helicopter Trailer Specifications

8.5’ x 28’ bumper pull

3’ V-nose front with solid front wall construction

9’6” interior height

9’ 4,000 lb. heavy duty ramp door w/ramp extension flap, spring assist, and transition flap between rear of trailer and rear ramp door

Ramp door and extension covered in ATP

36” side door with w/RV flush lock and step well

Walls and ceiling finished in white aluminum

Walls and ceiling insulated with Styrofoam insulation

Black and white checkered vinyl floor

(4) 5,000 lb. D-ring tie downs bolted to steel plates welded to frame and recessed flush to floor

(2) 8” x 24’ ATP strips in floor

(2) Interior 12 volt LED dome light with switch beside exterior door

110 v electrical including 2 interior receptacles, 1 interior switch, (2) 4’ fluorescent lights, 30 amp panel box and 25’ cord.  30 AMP exterior motor base RV plug wired into panel box

(2) Recessed 500 watt quartz lights curbside

Base cabinets in V-nose with 4 center pull out drawers and side cabinet door on each side of drawer unit.  Mill finish.

Non-powered roof vent braced for A/C and wired to switch beside entry door

24” ATP stone guard front, ATP stone guard strip up point of V-nose

(2) 5,200 lb. 4” drop leaf spring axles w/electric brakes on both axles

E-Z lube hubs

Inside fender boxes

Internal beaver tail

ST225 15” radial tires with aluminum wheels and spare

Screwed exterior surface of .024 gauge aluminum with baked white enamel finish

Wrapped Galvalume roof with no screws in top of roof

2” x 6” steel tube main frame

2” x 3” Steel tube cross members

4” steel backer plate welded around bottom of each wall

2” flat steel diagonals welded on each side wall

1” and ½” X 1” square steel tubing wall and ceiling frame

Floor and walls on 16” centers

Ceiling on 24” centers

3/8” finished plywood walls

¾” water treated plywood floor

2-5/16” coupler, 7-way plug, battery backup breakaway kit, safety chains, 2,000 lb tongue jack w/sand foot.  DOT required lights – sealed LEDs

Double LED tail lights with one set positioned at rear top of trailer